New Renault Logan ground clearance. What is the ground clearance of the Renault Logan? Characteristics of Renault Logan

The ground clearance of Renault Logan 2nd generation, in contrast to the previous model, has increased by 2 cm and is now 175 mm. The cross-country ability of the vehicle depends on this value. The ground clearance of Renault Logan 2 allows you to operate the car in any weather conditions. The car has high technical characteristics and a modernized fuel system. The new Renault Logan is equipped with engine crankcase protection, brake and driveline lines.

DIY tuning

If necessary, the Renault owner can independently improve specifications vehicle. To increase clearance, you can use the following methods:

1. Installation of spacers on racks - with the help of such tuning you can increase ground clearance by 2-3 cm. It must be remembered that in this case the stability of the car at high speed is lost. Standard parts that have different design loads will wear out faster. If the driver travels more often on the highway than on a country road, then spacers are not installed.
2. If the new Renault Logan is already in operation, then the ground clearance is increased by replacing the shock absorbers. When they wear out, ground clearance decreases. Experts consider the advantages of such tuning to have a slight impact on the stability of the car. Installing stiffer springs will provide additional driving comfort.
3. To increase ground clearance, large diameter rims are installed.
4. If you replace the shock absorbers, the ground clearance will increase for a short period of time.

Auto mechanics recommend increasing this indicator with a new set of wheels or tires. This method is considered the safest. The increase in vehicle height is about 2 cm and does not have a negative impact on driving quality, but is quite noticeable.

Before increasing the ground clearance, it is recommended to consult with specialists. This is due to the fact that when the ground clearance increases, the technical characteristics of the car change. If done incorrectly or using the wrong method, it can cause serious damage to the machine.

The hinge angle is pre-calculated. The maximum value of this indicator should not exceed angular velocity front suspension. If the calculations are incorrect, the load on this area will increase, which will lead to rapid wear and tear of the car.

To install the spacers yourself, you will need a set of wrenches and a jack. If the procedure is performed incorrectly, then new struts will need to be replaced after 30-40 km. This is due to a change in the longitudinal inclination of the wheel axis (caster). This indicator has a direct effect on stabilizing the wheel alignment when turning the steering wheel.

The value of castor must be taken into account when operating Renault Logan in winter time of the year. It should be remembered that at maximum load the old Renault sits a few millimeters, this helps reduce the distance between the road surface and the bottom.

The assembly of the vehicle is carried out by the Moscow Avtoframos plant and AvtoVAZ. The second generation Renault Logan is a restyled car. French engineers took into account the quality of Russian roads and improved the technical characteristics of the car.

Particular attention is paid to traffic safety. That is why you should very carefully intervene in carefully selected by professionals technical properties this car.

Ground clearance, or, as it is also called, ground clearance, is a segment from the lowest point of the vehicle body to the surface of the earth. But Renault Logan manufacturers measure this gap different ways. Therefore, the clearance from the shock absorbers, crankcase, or exhaust pipe is less than the value specified in the instruction manual.

Important: For Russian roads, clearance is important, so buyers pay special attention to this parameter.

During the existence of Renault Logan, this segment has changed several times.

1. Ground clearance 155 mm. This parameter is for first-generation vehicles produced in 2004, 2005, 2006, 2007, 2008 and 2009 in the sedan body and equipped with front-wheel drive and gasoline power unit 1.4 MT or 1.6 MT with 75 or 103 hp.
2. Ground clearance 147 mm. The updated first-generation Renault Logan models, released from 2009 to 2015, have this ground clearance value.
3. Second generation. Cars produced in 2014, 2015, 2016 and 2017 have this length of 155 mm. All Renault variants of these years were created with 4-door sedan bodies. The machines are equipped with a 1.6 MT power unit, the power of which is 82 or 102 hp. Options – Access, Confort, Luxe Privilege.

How to change ground clearance?

Each driver uses his own car to transport goods. The more a car is loaded, the lower its ground clearance becomes. In addition, the state of Russian roads in 2018 forces motorists to increase the clearance of their vehicles.

To prevent the car from sagging too much due to overload, and to increase ground clearance, it is recommended to do the following:

• Mount the spacers on the support posts. This method will increase the value of this parameter by 3 cm.
• Replace shock absorber springs. The method is suitable for owners who have been driving Renault Logan for a long time. Updating the springs allows you to increase the stability of vehicles on the road.
• Install new wheels of larger diameter.
• Renew rubber bands of shock absorber springs. This option helps to increase the lumen, but for a short period of time.
• Install interturn spacers. This action not only increases the distance from the ground to the vehicle, but also improves the performance of the shock absorbers.

Note: manually increasing the ground clearance has a negative effect on the car's handling. It also leads to rapid wear of spare parts that have different design loads.

The safest option for increasing the clearance between the car and the road, which does not affect control and wear of parts, is to replace tires and wheels. This method allows you to increase the clearance by 2 cm.

Renault Logan is a budget B-class car that has gained great popularity due to its price/reliability ratio, comfort and maintenance cost. Yes, the first generations of Logan immediately literally horrified car enthusiasts - connoisseurs of aesthetics. Appearance They were quite an acquired taste. However, today the Renault Logan is a pretty nice car that can already compete with cars such as the Hyundai Solaris, VW Polo and Kia Rio.

Today we will talk about Renault Logan ground clearance. However, there is nothing special to say here - Logan’s ground clearance has not changed for more than 15 years, starting from the very first generation of the car and is 15.5 centimeters at the lowest point. By the way, the low point of this budget car model is the engine protection.

Renault Logan ground clearance

Meanwhile, comparing the ground clearance of Renault Logan with its competitors, we note that it is slightly less than that of the slightly higher class Solaris and Rio (both have a clearance of 160 mm), as well as than that of the Lada Kalina (160 mm), Lada Priora ( 165 mm), Fiat Albea(180 mm), VW Polo (163 mm). Logan's ground clearance is the same as that of the Chevrolet Aveo.

In 1998, the French automobile concern Renault opened new project to create an inexpensive family-type sedan. The finished model was presented to the public in 2004. Serial production of the car under the designation L90 began in Romania at the Dacia plant. A year later, the assembly of Renault Logan was established on the assembly line of the Moscow AvtoFramos plant, and in 2007 the car began to be assembled at Mahindra & Renault in Indian city Nashik. were determined taking into account the characteristics of the region where the vehicle was used, for example, for Brazil, an engine with a volume of only 1 liter and a power of 70 hp was installed, but it could run on low-octane gasoline and ethyl alcohol. Engines of Renault Logan cars supplied to Russian market, comply with Euro-3 and Euro-4 standards, their volume is 1.6 liters with a power of 105 hp, high-octane fuel is required for such engines.

Economy class car

At the 2012 autumn motor show in Paris, a presentation of the new Renault Logan with sedan and Sandero hatchback body styles took place. Finally, in April 2013, a station wagon version was presented in Geneva. On the Renault Logan project, the developers worked on the latest methods of computer design of components and parts; cutting-edge technologies allowed them to save about 20 million euros. Manufacturers of units, body components and the power plant along with the transmission were tasked with bringing the Renault Logan project to a cost within 5,000 euros. The machine was initially aimed at sales and operation in third world countries. The share of manual labor in car production was assumed to be high, since automatic assembly lines are much more expensive.

Clearance is one of the main problems

Taking into account the prospect of driving on Russian roads, the ground clearance was calculated to be within 155 mm, while the European version is only 135-140 mm. However, when purchasing a car, Russian buyers unanimously said that it was low. Indeed, most cars designed for operation in Russia have a ground clearance of 170 mm, and even this figure does not always correspond to operating conditions on Russian roads. IN Lately A paradoxical situation has arisen in the Russian automobile market: manufacturers of passenger vehicles are trying to reduce ground clearance in order to lower the center of gravity and increase the stability of the car, and it is becoming increasingly difficult to drive such a car. The reason is bad roads, uneven roads, potholes, bumps. The question of what ground clearance the Renault Logan has is quite relevant. The driver is constantly faced with the problem of low landing of his car. And since any problem requires its own solution, we have to look for ways to increase ground clearance in order to ensure that the engine sump, lower shock absorber brackets and other protruding parts of the chassis cling less to road unevenness.

Ground clearance and wheels

If we talk about increasing the vehicle's ground clearance on our own, there are several ways to do this. To raise the car up to one and a half centimeters, it is enough to replace the factory standard tires with high-radial ones. For example, tires 195/65R14 to 195/70R14. thus will increase, although only slightly. You can do something more radical and install R15 wheels on the car. In this case, the ground clearance of the Renault Logan will increase significantly, but this is possible if the wheel arches allow the rotation of a larger wheel without touching, rubbing and other related phenomena. Therefore, you also need to select wheels by width. You should also monitor how the new wheel fits into the arch of the niche when turning. In addition, you need to keep in mind that when installing R15 wheels, errors in the speedometer are inevitable.

Spacers

The technical characteristics of the Renault Logan, the ground clearance of which needs to be increased, allow some changes to be made. In order to raise the car higher, constructive methods are used to increase ground clearance. One of them is the installation of so-called spacers in the rack spring socket. These are structurally simple products that follow the radial contour of the rack, made of aluminum. The spacers come with a set of installation bolts. The height of such a spacer is 20-25 mm, which, together with new wheels, allows you to achieve a significant increase in the vehicle's ground clearance. To install the spacer, you need to slightly raise the front of the car with a jack, loosen the central nut and tighten the spring with zip ties. After this, dismantle the rack and knock out the standard mounting bolts. Then press in new longer bolts and install the spacer. As a result, the Renault Logan's ground clearance will rise by 25 mm. The rear part is raised in a similar way, but a rubber spacer is used. Of course, before inserting these parts, they need to be selected correctly. There are many spacers on sale different sizes, made from various materials. It is important to ensure full compliance of the parameters of the new parts and the seat.

Ground clearance and turns

Often, ground clearance decreases due to the natural shrinkage of shock-absorbing springs, which occurs due to the constant high load of the trunk and interior. In this case, it is necessary to replace the springs with new ones. In this case, you can take advantage of the situation and install reinforced springs of a cargo standard in place of the old ones, which will be more consistent with the operating conditions of the car. An independent increase in the Renault Logan's ground clearance within a small range, 15-30 mm, will not entail any negative consequences, except for errors in the speedometer readings.

Center of gravity

However, when the ground clearance increases by 30 mm or more, you need to be prepared for the fact that it will become more difficult to drive the car. Since the center of gravity has become higher than the design point and the balance of the entire chassis has already been disrupted to some extent, sharp turns and bends will have to be avoided, as they can be dangerous. Before increasing the ground clearance of the Renault Logan, it is necessary to determine the optimal values ​​of the expected ground clearance and only then begin work.

Dimensions of the new Renault Logan, dimensions, ground clearance, ground clearance Renault Logan 2014-2015

Dimensions of the new Renault Logan have not changed significantly, but the length of the new body is longer. The wheelbase has also increased, although only by 4 mm. The luggage compartment remains just as roomy. The ground clearance or ground clearance of the new Renault Logan is still 15 and a half centimeters.

We offer compare the main dimensions of the old and new Logan body second generation. To begin with, you can compare those parameters that still coincide. So the ground clearance for both versions of the budget sedan is 155 mm, the luggage compartment volume is 510 liters, and the gas tank volume is 50 liters. All other indicators have changed at least slightly.

So, the length of the new Logan is 4346 mm, old version 4288 mm. The wheelbase, which determines the spaciousness in the cabin, is 2643 mm, versus 2630 mm in the old sedan body. The height and width of the updated car are 1517 and 1733 mm; in the old version of Logan these figures are slightly more than 1534 and 1740 mm.

Dimensions, weight, volumes, ground clearance of the new Renault Logan 2

• Length – 4346 mm
• Width – 1733 mm
• Height – 1517 mm
• Front track – 1497 mm
• Rear track – 1486 mm
• Curb weight – 1106 kg with a 1.6 liter engine (8-cl.)
• Curb weight – 1127 kg with a 1.6 liter engine (16 liters)
• Gross weight – 1545 kg with a 1.6 liter engine (8-cl.)
• Gross weight – 1566 kg with a 1.6 liter engine (16 liters)
• Base, distance between front and rear axle – 2634 mm
• Renault Logan trunk volume – 510 liters
• Fuel tank volume – 50 liters
• Tire size – 185/65 R 15
• Ground clearance or clearance of Renault Logan - 155 mm

Dimensions Renault Logan 2014-2015 model year are fully consistent with the “B” class. Such cars have one a big problem, it's quite a bit of space in the back row of seats. The dimensions of the car do not allow for a sufficiently spacious interior. Therefore, before buying a Logan in a new body, seriously think about whether there is enough space for you and your family in this sedan. If the family is small, and family members are not very demanding about comfort and large living space around, then Renault Logan is an ideal choice. This choice is supported not only by the price, but also by the latest serious modernization, which turned the “ugly” budget car into a decent and modern car.